The ASD-F1000 can directly read the concentration of dust particles in the air. The dust information was detected by the principle of light refraction. The sensor probe of the measuring instrument is designed with the air flow open and the optical path shielded to prevent dust pollution to the detecting element. It can be used in line with the monitoring system or other controllers for continuous monitoring of dust concentration in various dust workplaces. Strong scalability, can use solar panel power supply, wireless communication mode to send the relevant data information to the computer port monitoring system.
Industrial dust concentration measuring instrumentASD-F1000
Product Certification
Technical parameters
| Detection principle and detection type | Detection range |
|---|---|
| photoinduction | （10-1000）mg/m³(Other ranges can be customized) |
| Sampling mode and electrical interface | Operating voltage and power consumption |
Diffused G3/4 "thread (inside) | DC24V±6V ≤3W ( DC 24 V ) |
| Explosion-proof mark and protection grade | Operating temperature and humidity |
Ex ib IIB T4 Gb : Ex ibD 21 T130℃ IP66 | -10℃～ +40℃ ≤85%RH |
| Detection type | High-low alarm value |
|---|---|
| All kinds of dust PM>10 | 50mg/m³ (Factory set value) 100mg/m³ (Factory set value) |
| Operation mode and communication distance | specification |
| Infrared remote control distance < 8 m ≤1000m(wired) ≤3500m(Wireless (no occlusion)) | Cast aluminium ≤1.5Kg 280×166×90 |
| Communication mode | Output mode |
| ABUS(branch line)/RS485(branch line) (The following communication methods can be selected) LORA Wireless communication | The output ranges from 4 to 20mA, all of which are active GND Outputs (OP) and a set of passive outputs The output follow state can be set by adjusting |
System architecture
