The detector is also compatible with catalytic, infrared, semiconductor, electrochemical and other gas sensors. The shell is made of thickened explosion-proof aluminum alloy shell to ensure long-term stable work in various industrial explosion-proof environments. All-in-one detector can switch 2/3/4 wire system, RS485 and LORA communication by replacing the plug-in module. The detector comes with one switch output (passive relay output), the output can be adjusted by parameter setting to set the following mode, and the detector comes with one sound and light alarm (24DC) drive output.
Point flammable gas detector for industrial and commercial useGTYQ-ASD5382
Product Certification
Technical parameters
| Operating voltage and power consumption | Detection range |
|---|---|
| DC24V±6V ≤1.5W（DC24V） | Diffuse type |
| Electrical interface | Explosion-proof mark and protection grade |
| Alarm value | Operating temperature and humidity |
| See nameplate for specific parameters of different sensors | -40℃~+70℃ ≤93%RH |
| Detection principle | Communication distance |
|---|---|
| Catalytic combustion type, electrochemical type, infrared type, PID type | ≤1000m（RVSP1.5mm² ） |
| Output capacity | Communication mode and operation mode |
| 1 set of passive switching output 220VAC/24VDC,2A 1 set of active sound and light alarm output; | Infrared remote control, distance ≤8 meters 4 ～ 20mA Three-wire communication、 ABUS Four-bus system TBUS Two-bus system、 RS485、LORA Communication |
| Display mode | Pressure range and response time |
| 3 Indicator status | 86KPa~106KPa ＜30S(T90) |
System architecture
